CockpitCrafters - Octavi IFR-1 Bracket

Take your virtual flight training of the Octavi IFR-1 to a new level – together with the aluminum bracket from CockpitCrafters.
In close cooperation with the inventors of the IFR-1, the home cockpit designers of CockpitCrafters have developed a high-quality bracket designed to mount the IFR-1 on the Honeycomb Alpha and Bravo.

The well thought-out bracket allows you to mount the IFR-1 in an upright position on your Honeycomb with ease. The IFR-1 can be attached to the bracket and yoke/throttle thanks to the included knurled nuts and tools. Alternatively to the IFR-1, a RAM® Mount bracket can also be attached to the bracket as an option for mounting a tablet/smartphone. Thanks to the space-saving design, up to two brackets can be attached to one yoke or throttle – allowing the tablet or smartphone to be used at the same time as the IFR-1.

Features:

• Enables simple and stable mounting of the Octavi IFR-1 on a Honeycomb Alpha/Bravo or Logitech G Saitek Pro Flight Yoke
• Compatible with a Diamond Base mount from Ram® Mounts

Compatible with: 

• Octavi IFR-1
• Honeycomb Alpha Flight Controls (all generations)
• Honeycomb Bravo Throttle Quadrant
• Logitech G Saitek Pro Flight Yoke

Package contents:

• 1x aluminum bracket for Octavi IFR-1/ RAM Mount
• 2x pan-head screw M4 for RAM Mount 4x hexagon head screw M2.5 for IFR-1
• 4x knurled nut M2.5 for IFR-1
• 1x Torx T5 key for IFR-1

Not included:

• Honeycomb - Alpha Flight Controls
• Honeycomb - Bravo Throttle Quadrant
• Octavi IFR-1
• RAM® Mount

Important information: To mount the IFR-1, hexagon head screws must be inserted into the underside of the IFR-1 inside the mounting fixture specifically designed by Octavi for this purpose. Both the tool and detailed instructions on how to open the IFR-1 correctly are included. Disassembly of the IFR-1 is at your own risk. Octavi GmbH and CockpitCrafters accept no liability for any damage to the device caused by opening and closing the housing or improper handling of the screws, e.g. applying excessive torque. Please only use the M2.5 hexagon head screws and knurled nuts supplied. The use of other screws carries the risk of damaging the IFR-1, especially if the dimensions of the screws deviate from the specified standards.

Note: the screenshots show mounting examples, the hardware shown is not included in this package.