Just Flight - PA-28-161 Warrior II MSFS

The PA-28-161 Warrior II is a four-seater, piston-engine aircraft equipped with a fixed tricycle landing gear, 160hp four-cylinder engine and fixed-pitch propeller – an ideal aircraft for touring and flight training.

The Warrior II is flown all around the world and our add-on reflects that global popularity. In addition to our UK research aircraft, G-BOZI, this package features liveries from the USA, Canada, UK, France, Australia and Germany.

The PA-28-161 Warrior II for Microsoft Flight Simulator features a native model and 4096 x 4096 PBR materials for the highest possible texture detail and clarity.

Model:

• Accurately modelled PA-28-161 Warrior II, built using real-world aircraft plans and comprehensive photography of the real aircraft
• Numerous animations including passenger door, baggage door, cockpit storm window and sun visors
• Ground equipment including chocks, tie-downs and pushback towbar
• 4096 x 4096 textures are used to produce the highest possible texture clarity
• PBR (Physically Based Rendering) materials with real-time environment reflections for superb quality and realism
• Detailed normal mapping for down-to-the-rivet precision of aircraft surfaces
• Ground services support (marshaller and fuel truck)
• Full support for MSFS visual icing effects

Cockpit:

• A truly 3D virtual cockpit right down to accurately modelled seat belts and screw heads - every instrument is constructed fully in 3D with smooth animations
• Cockpit textures feature wear and tear based on reference photos taken in the real aircraft to produce an authentic environment
• Dimmable instrument, radio and dome lighting, with separate control circuits
• Tablet EFB for controlling various aircraft options and checking aircraft and flight information:
•  'Cold & Dark', 'Ready for Take-off' and 'Ready for Start' aircraft states
•  Persistent aircraft states, allowing you to always return to your cockpit in the same state that you last left it
•  Automatic switching of the fuel tanks for use on those long distance cross-country flights
•  GPS unit selection – GPS 100, GPS 100, GNS 430/GNS 530 and GTN 750 (requires freeware PMS-50 GTN 750)
•  Direction Indicator (DI) or Horizontal Situation Indicator (HSI) instrument options
•  Aircraft failures (spark plug fouling, vapour lock, oil use and battery failure)
•  Passenger and baggage door controls
•  Flight computer with useful information such as fuel burn, endurance, speed and wind speed/direction
• Fully functional and comprehensive IFR capable avionics fit including:
•  KMA 20 audio selector unit
•  KX 170B COM 1 / NAV 1 radio
•  KX 175B COM 2 / NAV 2 radio
•  KN 62 DME unit which can display information from NAV 1, NAV 2 or its own inbuilt receiver (NAV 3)
•  Century 21 autopilot with lateral hold modes - HDG, NAV, APR, REV (altitude hold clickspot included)
•  KT 76A transponder unit
•  KR 85 ADF unit with ADF/ANT/BFO modes and support for fractional frequencies, e.g. 383.3
•  GPS 100, GNS 430/GNS 530 and GTN 750 (requires freeware PMS-50 GTN 750)
•  HSI/OBS support RNAV approach indications
• Yoke-mounted flight timer/clock
• Altimeter with either mb or inHg barometric scales, depending on units of measurement setting
• Developed using the latest MSFS standards, including intuitive and easy-to-use controls for rotary knobs, multi-position switches and levers
• Fully compatible with MSFS VR mode

Aircraft systems:

• Custom-coded fuel system including the option to have automatic switching of the fuel tanks for use on long distance cross-country flights
• Custom-coded electrical system with functional circuit breakers, avionics power circuit and emergency bus controls
• Functioning carburettor and primer controls
• Failures including spark plug fouling, limited battery life, vapour lock and more
• Lighting system includes separate lighting control for instruments (via rheostat) and realistic implementation of navigation light / radio light rheostat
• Many other details, such as a passenger door that automatically closes with airflow and vibrating engine exhausts!
• Full support for MSFS checklists (manual and automatic/co-pilot modes)

Sounds:
The Just Flight Warrior II features an MSFS-native (Wwise) sound package taking full advantage of the new capabilities. Every little detail has been faithfully recreated, based on high fidelity recordings from real-world PA-28s.

• Original Lycoming O-320 engine samples
• Detailed physics-based effects on engine and wind noise
• Authentic audio for every switch, button, lever and electrical system
• Accurately positioned 3D sound sources (best enjoyed in VR!)
• Custom crash and scraping effects
• Background panel rattle at low engine RPM and more!

Liveries:
The Warrior II is supplied in the following eight paint schemes:

• G-BOZI (UK)
• G-OPTI (UK)
• G-SIXT (UK – BOAC flying club)
• N8289A (USA)
• D-EIIT (Germany)
• F-GEDO (France)
• C-FOEC (Canada)
• VH-BVM (Australia)

Other features:

• Realistic and accurate flight dynamics based on real world performance and handling data and input from Warrior pilots
• Comprehensive manual with panel guide and performance data
• PSD Paint Kit incuded so you can create your own paint schemes

• Microsoft Flight Simulator (Version 2020)
• Betriebssystem: Windows 10 / 11
• Prozessor: Intel i5-8400 | AMD Ryzen 5 1500X
• Videospeicher: 8 GB
• Grafik: NVIDIA GTX 970 | AMD Radeon RX 590
• Freier Festplattenspeicher: 16 GB
• Zubehörteile: Joystick oder kompatibler Gamecontroller (z. B. Xbox One Controller für Windows)

Wenn Sie bereits folgende Produkte im Aerosoft Shop erworben haben, steht Ihnen folgende Upgrade-Möglichkeit zur Verfügung:

• PA-28-161 Warrior II (FSX/P3D) › PA-28-161 Warrior II (MSFS): 
  DL › 28,23 € inkl. 19% MwSt. (23,72 € ohne MwSt. | Preisangabe ggf. aufgrund der landesspezifischen MwSt. des Herkunftslandes abweichend)

• PA-28R Arrow III (MSFS) › PA-28-161 Warrior II (MSFS):  
  DL › 28,23 € inkl. 19% MwSt. (23,72 € ohne MwSt. | Preisangabe ggf. aufgrund der landesspezifischen MwSt. des Herkunftslandes abweichend) 

• PA-28R Turbo Arrow III (MSFS) › PA-28-161 Warrior II (MSFS): 
  DL › 28,23 € inkl. 19% MwSt. (23,72 € ohne MwSt. | Preisangabe ggf. aufgrund der landesspezifischen MwSt. des Herkunftslandes abweichend)

• PA-28R Arrow III & Turbo Arrow III/IV Bundle MSFS › PA-28-161 Warrior II (MSFS): 
  DL › 28,23 € inkl. 19% MwSt. (23,72 € ohne MwSt. | Preisangabe ggf. aufgrund der landesspezifischen MwSt. des Herkunftslandes abweichend)

Legen Sie das Produkt einfach in den Warenkorb und der Rabatt wird automatisch abgezogen. Dazu müssen Sie in Ihrem Kundenkonto angemeldet sein, das Sie beim Kauf des anderen Produkts verwendet haben.

Version 0.3.9:

• Improved low-speed handling characteristics
• Improved stall characteristics
• Added new MSFS ground friction support
• Added CFD support
• Improved trim sensitivity logic - Elevator trim is now less sensitive by default
• Added trim sensitivity slider saving between flights

Version 0.3.8:

• TDS GTNXi autopilot compatibility - fixed
• Missing cockpit glass effects (including rain) - fixed

Version 0.3.7:

• Working Title GNS autopilot issues - fixed
• KR85 ADF ANT mode logic added
• Storm window not animated when using exterior camera – fixed
• Autopilot panel texture issues – fixed
• Dome light texture improved
• Cockpit camera can no longer be moved outside cockpit area
• Tweaks to autopilot navigation hold accuracy
• Engine not starting when selecting Ready for Takeoff state from cold & dark – fixed
• NAV/GPS switch logic changes for improved compatibility with WT GNS, PMS-50 GTN and TDS GTNXi
• Autopilot panel illuminated with no electrical power – fixed

Version 0.3.6:

• SU12 compatibility
• Xbox compatibility (Marketplace only)
• Latest TDS GTNXi models/textures added
• Compatibility with latest versions of Working Title GNS, PMS-50 GTN and TDS GTNXi (including new autopilot logic)
• EFB functionality upgrades:
• Import your SimBrief flight and view a summary or scrollable full OFP
• Monitor your position in real time using a map view with tracking, zoom and pan options
• Explore and view your Navigraph charts, with automatic selection of departure and arrival airports based on your SimBrief OFP, and ability to favourite charts for quick reference
• Use a notepad for making notes during the flight, particularly useful for noting down clearances and taxi instructions
• Interactive checklists, in addition to the existing MSFS checklist support
• A top-of-descent calculator with the option to manually input altitudes, speeds and descent requirements or to have those sync'd from the sim
• An on-screen/virtual keyboard, especially useful for VR users
• METARs for your SimBrief OFP departure, arrival and alternate airports
• Animations and cockpit interactions updated for compatibility with LOCK interaction mode and Xbox
• Flight model updates (greater pitch stability and better ground handling)
• Trim sensitivity slider added to EFB, allowing you to fine tune the sensitivity of the pitch trim
• Improved spark plug fouling simulation
• Vertical speed hold hidden clickspot added to autopilot panel - with altitude hold engaged, clicking on the vertical speed clickspot will engage vertical speed hold mode, holding the vertical speed that existed at the point of engagement
• Dynamic baggage added - a variety of baggage will appear in the baggage compartment, depending on the selected payload weight
• Smoother cockpit pushbutton animations
• GNS 530/430 screens resized to prevent edge clipping
• Support added for SET ELECTRICAL FUEL PUMP 1 control assignment
• Throttle quadrant cursor icons (hand/grab) updated to make it easier to see when your cursor is moving between levers
• Improved look for illuminated lights/annunciators
• Instrument camera preset names fixed, additional presets added for passenger and baggage views
• Interactive points added for improved ambient sounds in cockpit with doors open
• Manuals updated
• TDS GTNXi Smart Glide compatibility added
• EFB up/down rotation clickspots added to bezel
• Gap around NAV 1 OBI - fixed
• Wing fuel tank cap positions fixed
• Primer knob sound fixed

Version 0.3.5:

• SimConnect autopilot events (e.g. HEADING_BUG_SET) fixed

Version 0.3.4:

• Pilot model replaced with MS/Asobo pilot avatar
• ICAO type data updated (used for AI/multiplayer model matching)
• Heading/course bug select control assignments fixed (used by Honeycomb Bravo and other hardware)
• Altimeter barometric scale markings adjusted for greater clarity
• Instrument panel metal strip texture issue fixed
• Primer now controllable using LOCK interaction system
• Propeller material tweaked to avoid sunlight reflections

Version 0.3.3:

• Elevator trim speed reduced for finer control

Version 0.3.2:

• Avionics switch no longer turns off when the battery master is selected off
• HUD flap scale fixed
• Rudder trim animation improved
• Elevator trim animation improved
• NAV 1 ident not audible - fixed
• DATCON and HOBBs animations fixed
• GPS 100 heading value no longer affected by drift
• Autopilot now supports on/off control assignments
• Pilot no longer visible in hanger view
• Minor sound tweaks
• ASI TAS scale position now included in state saving
• Altimeter inHG baro scale fixed
• TDS GTNXi integration added
• Updated manual

Version 0.3.1:

• Elevator trim axis has limited range - fixed
• COM/NAV radio volume and power logic improvements
• Further tweaks to cockpit instrument reflections
• Cockpit screen clickspot logic improvements
• Landing light effect repositioned for better match with model
• PUMP ON and PUMP OFF assignments fixed
• Pilot visible when cold & dark – fixed